Automotive Systems
LEE, C. F. Mixture preparation of port injected spark ignition engines (review). Detroit Automotive Tech. Conf. (Southfield, Mich., Mar. 1999).
MARTIN, G. C., T. J. SCHMID, R. E. COVERDILL, R. P. LUCHT, and J. E. PETERS. An experimental investigation of combustion in a direct-injected natural gas engine. Proc. 1st Joint Mtg. U.S. Section of the Combust. Inst. (Washington, D. C., Mar. 1999).
TRUJILLO, M. F. and C. F. LEE. Statistical model of the splashing products produced by liquid drop impact on a solid surface. 12th Ann. Conf. on Liquid Atomization and Spray Syst. (Indianapolis, Ind., May 1999).
ZENG, Y. and C. F. LEE. Computation of multicomponent film evolution during spray impingement. 12th Ann. Conf. on Liquid Atomization and Spray Syst. (Indianapolis, Ind., May 1999).
ZENG, Y. and C. F. LEE. Modeling of multicomponent fuel spray and film evaporations in I. C. engines. Proc. 2nd Asia-Pacific Conf. Combust. (Tainan, Taiwan, May 1999).

Bioengineering
GORKOV, P. G., D. MORRIS, J. G. GEORGIADIS, and K. W. MOSER. Development of a small permanent magnet for biomedical MRI. 40th Exper. NMR Conf. (Orlando, Fla., Feb./Mar. 1999).
MORRIS, D., P. G. GORKOV, A. B. HARRIS, J. TSAO, K. W. MOSER, J. G. GEORGIADIS, A. WEBB, and P. LAUTERBUR. Micro-samples, micro-coils, micro-magnets: where will all this smallness end? 5th Intl. Conf. on Magn. Reson.Micros. (Heidelberg, Germany, Sept. 1999).
STACE, T. M. and E. R. DAMIANO. A mechano-electro-chemical model of flow, deformation, and molecular diffusion in the capillary glycocalyx. FASEB J. (Washington, D. C., Apr. 1999) 13 (1999).
STACE, T. M., D. O. PUSKIN, and E. R. DAMIANO. A model of the electrochemical equilibrium configuration of the capillary glycocalyx. Ann. Biomed. Engr. (Atlanta, Ga., Oct. 1999) 27, Suppl. 1 (1999).

Combustion And Propulsion
ALI, A. N., S. F. SON, B. W. ASAY, R. K. SANDER, and M. Q. BREWSTER. Laser ignition of high explosives. 36th JANNAF Combust. Subcomm. Mtg. (Cocoa Beach, Fla., Oct. 1999).
ALI, A., S. F. SON, R. SANDER, B. ASAY, and M. Q. BREWSTER. Ignition dynamics of high explosives. 37th Aerosp. Sci. Mtg., AIAA paper no. 99-0862 (Reno, Nev., Jan. 1999).
CHORPENING, B. T. and M. Q. BREWSTER. Flame structure of AP/HTPB sandwiches with laser augmented combustion. 36th JANNAF Combust. Subcomm. Mtg. (Cocoa Beach, Fla., Oct. 1999).
CHORPENING, B. T. and M. Q. BREWSTER. Flame structure of composite solid propellants from emission imaging. 37th Aerosp. Sci. Mtg., AIAA paper no. 99-0594 (Reno, Nev., Jan. 1999).
FOGLESONG, R. E., T. R. FRAZIER, L. M. FLAMAND, J. E. PETERS, and R. P. LUCHT. Flame structure and emissions characteristics of a lean premixed gas turbine combustor. 35th AIAA/ASME/SAE/ASEE Joint Propul. Conf. and Exhibit, AIAA paper no. 99-2399 (Los Angeles, Calif., Jun. 1999).
HICKMAN, S. R. and M. Q. BREWSTER. Laser-recoil response of AP-HTPB propellants (1-5 atm): selective pyrolysis response. 37th Aerosp. Sci. Mtg., AIAA paper no. 99-0592 (Reno, Nev., Jan. 1999).
KNOTT, G. M. and M. Q. BREWSTER. Numerical analysis of solid propellant sandwich combustion. 36th JANNAF Combust. Subcomm. Mtg. (Cocoa Beach, Fla., Oct. 1999).
KNOTT, G. M., M. Q. BREWSTER, and T. L. JACKSON. A simplified model for composite propellant burning rate. 37th Aerosp. Sci. Mtg., AIAA paper no. 99-0591 (Reno, Nev., Jan. 1999).
MELCHER, J. C., H. KRIER, and R. L. BURTON. Aluminum combustion measurements in a solid rocket motor. JANNAF Combust. Mtg. (Cocoa Beach, Fla., Oct. 1999).
MELCHER, J. C., R. L. BURTON, and H. KRIER. Combustion of aluminum particles in solid rocket motor flows. 35th AIAA/ASME/SAE Joint Propul. Conf., AIAA paper no. 99-2630 (Los Angeles, Calif., Jun. 1999).
MURPHY, J. J. and H. KRIER. Linear pressure coupled frequency response of heterogeneous solid propellants. Proc. 27th Intl. Symp. on Combust. (Boulder, Colo., Aug. 1999) 2343-2350 (1999).
MURPHY, J. J. and H. KRIER. Transient solid propellant burning rate measurements. Intl. Colloquium on Dyn. of Explosions and Reactive Syst., ICDERS paper 106 (Heidelberg, Germany, Jul. 1999).
MURPHY, J. J. and H. KRIER. Ultrasonic measurements for dynamic solid propellant combustion. JANNAF Combust. Mtg. (Cocoa Beach, Fla., Oct. 1999).
ORTH, L. and H. KRIER. Shock physics for non-ideal detonations of metalized energetic explosives. Proc. 27th Intl. Symp. on Combust. (Boulder, Colo., Aug. 1999) 2327-2333 (1999).
SPALDING, M. J. and H. KRIER. Boron ignition and combustion using a shock tube. Intl. Shock Wave Symp., ISSWZZ paper 17 (London, England, Jul. 1999).
TANG, K. C. and M. Q. BREWSTER. Computational simulation of nonlinear L* combustion instability in solid rockets. 37th Aerosp. Sci. Mtg., AIAA paper no. 99-0859 (Reno, Nev., Jan. 1999).
ZENG, Y. and C. F. LEE. A new multicomponent droplet preferential evaporation model. Proc. 1st Joint Mtg., U.S. Section of the Combust. Inst. (Washington, D .C., Mar. 1999).
ZENG, Y. and C. F. LEE. Multidimensional multicomponent film vaporization model. 9th Intl. Engine Combust. Multidimensional Modeling Conf. (Detroit, Mich., Feb. 1999).

Computational Science And Engineering
YIN, L., A. ACHARYA, N. SOBH, R. B. HABER, and D. A. TORTORELLI. A space-time discontinuous Galerkin method for elastodynamic analysis. Intl. Symp. on Discontinuous Galerkin Meth. (Newport, R. I., May 1999).

Control Systems
ALLEYNE, A. Passivity-based nonlinear control strategies for strict feedback form systems. Proc. 1999 Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999), DSC-vol. 67, 133-140 (1999).
ALLEYNE, A. and H. HAVLICSEK. Learning control of an electrohydraulic injection molding machine. Proc. 1999 NSF Des. and Mfg. Grantees Conf. (Los Angeles, Calif., Jan. 1999).
ALLEYNE, A. and H. HAVLICSEK. Nonlinear control of an electrohydraulic injection molding machine via iterative learning. Proc. Am. Contr. Conf. (San Diego, Calif., Jun. 1999) 176-181 (1999).
ALLEYNE. A. and H. HAVLICSEK. Nonlinear modeling of an electrohydraulic injection molding machine. Proc. Am. Contr. Conf. (San Diego, Calif., Jun. 1999) 171-175 (1999).
BENTSMAN, J. and A. ORDYS. Ill-posedness and ill-conditioning in the use of CARMA, CARIMA and Box-Jenkins models in identification and control. Proc. 1999 Europ. Contr. Conf., CD ROM paper no. F1031-2 (Karlsruhe, Germany, Aug./Sept. 1999).
BRENNAN, S. and A. ALLEYNE. A scaled testbed for vehicle control: the IRS. Proc. IEEE Conf. on Contr. Appl. (Kona, Hawaii, Aug. 1999) 327-332 (1999).
BRENNAN, S. and A. ALLEYNE. Driver assisted yaw rate control. Proc. Am. Contr. Conf. (San Diego, Calif., Jun. 1999) 1697-1701 (1999).
D'ANDREA, R., C. BECK, and G. E. DULLERUD. Temporal discretization of spatially distributed systems. Proc. IEEE Conf. Decision Contr. (Phoenix, Ariz., Dec. 1999) 197-202 (1999).
DULLERUD, G. E. and R. O'ANDREA. Distributed control of inhomogeneous systems with boundary conditions. Proc. IEEE Conf. Decision Contr. (Phoenix, Ariz., Dec. 1999) 186-190 (1999).
DULLERUD, G. E. and R. S. SMITH. The validation of model sets on the basis of closed-looped feedback system generated data. Proc. IEEE Intl. Symp. Comput.-Aided Contr. Syst. Des. (Kona, Hawaii, Aug. 1999) 308-314 (1999).
ERDEM, E. and A. ALLEYNE. Investigation of the global stability of second order systems controlled by the SDRE method. Proc. Am. Contr. Conf. (San Diego, Calif., Jun. 1999) 2501-2505 (1999).
HONG, K.-S., V. SOLO, and J. BENTSMAN. Adaptive control of a time-varying parabolic system: averaging analysis. Proc. 14th Triennial Intl. Fed. of Automat. Contr. World Congr. (Beijing, China, Jul. 1999), vol. E, 351-356 (1999).
LANGSON, W. and A. ALLEYNE. A stability result with application to nonlinear regulation. Proc. Am. Contr. Conf. (San Diego, Calif., Jun. 1999) 3051-3056 (1999).
LIU, R. and A. ALLEYNE. Nonlinear force/pressure tracking of an electro-hydraulic actuator. Proc. IFAC World Congr. (Beijing, China, Jul. 1999) vol. B, 469-474 (1999).
MILLER, B. M. and J. BENTSMAN. A new approach to control of dynamic systems with unilateral constraints. Proc. 14th Triennial Intl. Fed. of Automat. Contr. World Congr. (Beijing, China, Jul. 1999), vol. C, 199-203 (1999).
ORLOV, Y. and J. BENTSMAN. Discontinuous control and simultaneous identification of distributed parameter systems. Proc. 38th IEEE Conf. on Decision and Contr. (Phoenix, Ariz., Dec. 1999) 4251-4256 (1999).
PRASETIAWAN, E., R. ZHANG, A. ALLEYNE, and T. TSAO. Modeling and control of a powertrain simulation testbed for earthmoving vehicles. Proc. Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999), FPSTD-vol. 6, 139-146 (1999).
ZHAO, H. and J. BENTSMAN. Multivariable Ho predictive control based on minimax predictor. Proc. 38th IEEE Conf. on Decision and Contr. (Phoenix, Ariz., Dec. 1999) 3699-3705 (1999).
ZHAO, H., W. LI, C. TAFT, and J. BENTSMAN. Robust controller design for simultaneous control of throttle pressure and megawatt output in a power plant unit. Proc. IEEE Intl. Conf. on Contr. Appl. (Kohala Coast, Hawaii, Aug. 1999) 802-807 (1999).

Design Methodolgy And Tribology
BHATIA, C. S., A. A. POLYCARPOU, and A. K. MENON. Proc. Symp. on Interface Tribology Towards 100 Gb/in2 (Orlando, Fla., Oct. 1999) Trib-vol. 9 (1999).
BRUNS, T. E. and D. A. TORTORELLI. Topology optimization of geometrically nonlinear structures and compliant mechanisms. Proc. 3rd World Congr. Struct. and Multidisciplinary Optimization (WCSMO) (Niagara Falls/Amherst, N. Y., May 1999).
HANCHI, J., A. A. POLYCARPOU, and Z. BOUTAGHOU. An investigation of the tribology of MR-proximity head-disk interfaces. Intl. Magn. Conf. (Kyongju, Korea, May 1999).

Dynamics Systems
FULLILOVE, J., N. R. MILLER, M. A. SHANNON, M. L. PHILPOTT, A. F. VAKAKIS, J. G. GEORGIADIS, and H. GE. Mesoscale dynamic ice formation and breaking on a vibrating thin membrane. Proc. 17th Biennial Conf. on Mech. Vib. and Noise (Las Vegas, Nev., Sept. 1999).

Energy Systems And Thermodynamics
BEAVER, A., J. M. YIN, C. W. BULLARD, and P. S. HRNJAK. Experimental and model study of the heat pump/air conditioning systems based on transcritical cycle with R744. Proc. 20th Intl. Congr. Refrig. (Sydney, Australia, Sept. 1999).
BOEWE, D. E., J. M. YIN, Y. C. PARK, C. W. BULLARD, and P. S. HRNJAK. The role of suction line heat exchanger in transcritical R744 mobile a/c systems. SAE Conf. (Detroit, Mich., Mar. 1999) SAE paper no. 99HX-3, 8 pp. (1999).
MAO, Y. and P. S. HRNJAK. Defrost issues of display cabinets with DX evaporators and heat exchangers with secondary refrigerants. Proc. 20th Intl. Congr. Refrig. (Sydney, Australia, Sept. 1999).
MAO, Y., W. TERRELL, and P. S. HRNJAK. Performance of a display case at low temperatures refrigerated with R404a and secondary coolants. Proc. Intl. Inst. Refrig., Refrig. Sci. Tech. (Cambridge, England, Apr. 1999) 181-188 (1999).
MCENANEY, R. P., Y. C. PARK, J. M. YIN, C. W. BULLARD, and P. S. HRNJAK. Performance of the prototype of a transcritical R744 mobile a/c system. SAE Conf. (Detroit, Mich., Mar. 1999) SAE paper no. 99PC-6, 7 pp. (1999).
PARK, Y. C., D. E. BOEWE, J. M. YIN, and P. S. HRNJAK. Steady state and cycling performance of a typical R134a mobile air conditioning system. SAE Conf. (Detroit, Mich., Mar. 1999) SAE paper no. 1999-01-1190 (1999).
PARK, Y. C., J. M. YIN, C. W. BULLARD, and P. S. HRNJAK. Experimental and model analysis of control and operating parameters of transcritical CO2 mobile a/c system. VTMS-4 Conf. (London, England, May 1999) 163-170 (1999).
RODARTE, E., G. SINGH, N. MILLER, and P. S. HRNJAK. Noise generation from expansion devices in refrigerant. SAE Intl. Congr. Expo., SAE paper no. 1999-01-0866 (Detroit, Mich., Feb. 1999).
RODARTE, E., G. SINGH, N. R. MILLER, and P. S. HRNJAK. Refrigerant expansion noise propagation through downstream tube walls. SAE Intl. Congr. Expo., SAE paper no. 1999-01-1197 (Detroit, Mich., Feb. 1999).
SINGH, G., E. RODARTE, N. R. MILLER, and P. S. HRNJAK. Noise generation from expansion devices in refrigerant. SAE Conf. (Detroit, Mich., Mar. 1999) SAE paper no. 1999-01-0866 (1999).

Engineering Mechanics
HALVERSON, T. L. and T. J. MACKIN. Damage evolution in model composites with controlled interface properties. Ann. Mtg. the Am. Ceram. Soc. (Indianapolis, Ind., May 1999.
HALVERSON, T. L. and T. J. MACKIN. Damage evolution in model composites with controlled interfacial properties. Proc. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).
HORN, G. and T. J. MACKIN. Effect of impact damage on fatigue lifetimes of polymer matrix composites. Proc. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).
HORN, G., T. J. MACKIN, and P. E. KURATH. Estimating fatigue lifetimes of damaged composites using thermoelasticity. Ann. Mtg. Minerals, Metals, and Materials Soc. (San Diego, Calif., Mar. 1999).
MACKIN, T. J. and T. PAPHAPOTE. Dynamic puncture testing of polymer membranes. Proc. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).

Fluid Dynamics
BOSWELL, B. A. and J. C. DUTTON. Flow visualization and measurements of a three-dimensional supersonic separated flow. 37th AIAA Aerosp. Sci. Mtg., AIAA paper no. 99-0294 (Reno, Nev., Jan. 1999).
BOURDON, C. J. and J. C. DUTTON. Shear layer flapping and interface convolution in a separated supersonic flow. 30th AIAA Fluid Dyn. Conf., AIAA paper no. 99-3586 (Norfolk, Va., Jun. 1999).
MA, N. and J. S. WALKER. Segregation during Bridgman crystal growth in space with an axial magnetic field. Proc. Intl. Scientific Colloquium on Modelling of Mater. Processing (Riga, Latvia, May 1999) 12-16 (1999).
MARTIN WITKOWSKI, L., P. MARTY, and J. S. WALKER. The use of high-frequency rotating magnetic fields in crystal growth. Proc. Intl. Scientific Colloquium on Modelling of Mater. Processing (Riga, Latvia, May 1999) 4--53 (1999).
MEYER, T. R., J. C. DUTTON, and R. P. LUCHT. Experimental study of the mixing transition in a gaseous axisymmetric jet. 30th AIAA Fluid Dyn. Conf., AIAA paper no. 99-3585 (Norfolk, Va., Jun. 1999).
OLSEN, M. G. and J. C. DUTTON. Planar velocity measurements in a weekly compressible mixing layer. 30th AIAA Fluid Dyn. Conf., AIAA paper no. 99-3584 (Norfolk, Va., Jun. 1999).
WOODMANSEE, M. A., J. C. DUTTON, and R. P. LUCHT. Experimental measurements of pressure, temperature, and density in an underexpanded sonic jet flowfield. 30th AIAA Fluid Dyn. Conf., AIAA paper no. 99-3600 (Norfolk, Va., Jun. 1999).

Heat Transfer
MEHENDALE, S. S., A. M. JACOBI, and R. K. SHAH. Heat exchangers at micro- and meso-scales. Proc. Intl. Conf. on Compact Heat Exchangers and Enhancement Tech. for the Process Indus. (Banff, Canada, Jul. 1999) 55-74 (1999).
MEHENDALE, S. S., A. M. JACOBI, and R. K. SHAH. Micro- and meso-scale frontiers of compact heat exchangers. Intl. Conf. on Opt. Meas. Heat and Mass Transfer (Berlin, Germany, Jun. 1999).
NEWELL. T. A. and R. SHAH. Refrigerant heat transfer, pressure drop, and void fraction effects in microfin tubes. 2nd Intl. Symp. on Two-Phase Flow Modeling and Exper. (Pisa, Italy, May 1999).
ROGERS, J. W. and L. M. PHINNEY. Nanosecond laser experiments of microstructure adhesion reduction. Proc. 1999 Intl. Mech. Engr. Congr. Expo. (Nashville, Tenn., Nov. 1999) HTD-vol. 364-3, 25-30 (1999).

Human Factors
CHAFFIN, D. B., J. J. FARAWAY, and X. ZHANG. Simulating human motions. 2nd Digital Human Modeling for Des. and Engr. Conf. (Hague, Netherlands, May 1999).
JONES, P. M., C. D. WILKINS, R. BARGAR, J. SNIEZEK, P. ASARO, D. KESSLER, M. LUCENTI, I. CHOLI, O. CHERNYSHENKO, C. C. HAYES, N. TU, M. LIANG, and J. SCHLABACH. CoRAVEN: modeling and design of a multimedia intelligent infrastructure for collaborative intelligence analysis. 3rd Ann. ARL Fed. Lab. Symp. (College Park, Md., Feb. 1999).
MASSIMINO, M., C. M. MITCHELL, D. J. STILWELL, P. J. SMITH, D. A. THUMAN, J. T. MAILIN, and P. M. JONES. Human centered automation: the view from Earth versus the view from Mars. 43rd Ann. Mtg. Human Factors and Ergonom. Soc. (Houston, Tex., Oct. 1999).
PARK, W., X. ZHANG, C. B. WOOLLEY, J. FOULKE, U. RASEHKE, and D. B. CHAFFIN. Integration of magnetic and optical motion tracking devices for capturing human motion data. 2nd Digital Human Modeling for Des. and Engr. Conf. (Hague, Netherlands, May 1999).
WILKINS, D. C., O. J. MENGSHOEL, O. CHERNYSHENKO, P. M. JONES, C. C. HAYES, and R. BARGAR. Collaborative decision making and intelligent reasoning in judge advisor systems. Hawaii Intl. Conf. on Syst. Sci. (Hawaii, Jan. 1999).

Manufacturing Systems
DOGRA, A. P., S. G. KAPOOR, and R. E. DEVOR. Mechanistic model for tapping process with emphasis on process faults and hole geometry. ASME Symp. on Machining Sci. Tech., MED-vol. 10 (Nashville, Tenn., Nov. 1999).
DORNFELD, D., P. K. WRIGHT, F-C. WANG, P. SHENG, J. A. STORI, V. SUNDARARAJAN, N. KRISHNAN, and C-H. CHU. Multi-agent process planning for a networked machining service. Trans. NAMRI/SME (Berkeley, Calif., May 1999) vol. XXVII, 191-196 (1999).
ZHU, R., S. SASTRY, R. E. DEVOR, S. G. KAPOOR, and W. A. KLINE. Machining process fault diagnosis-a process model-based approach. Proc. 2nd Intl. Wkshp. on Intell. Mfg. Syst. (Leuven, Belgium, Sept. 1999) 835-844 (1999).

Materials Behavior
ACHARYA, A. and A. J. BEAUDOIN. Consideration of lattice incompatibility in the evolution of hardening. 12th Intl. Conf. on Textures of Mater. (Ottawa, Ont., Canada, Aug. 1999).
ACHARYA, A. and A. J. BEAUDOIN. Grain size effects in viscoplastic polycrystals at moderate strains. 5th U.S. Nat. Congr. on Computat. Mech. (Boulder, Colo., Aug. 1999).
BANGE, M. E., A. J. BEAUDOIN, M. STOUT, S. R. CHEN, and S. R. MACEWEN. Constitutive relations for aluminum alloys aa 5182 and aa 6061. 4th Intl. Conf. on Constitutive Laws for Engr. Mater. (Troy, N. Y., Jul. 1999).
BEARDSLEY, M. B., P. G. HAPPOLDT, K. C. KELLY, E. F. REJDA, and D. F. SOCIE. Thermal barrier coatings for low emission, high efficiency diesel engine applications. SAE paper no. 1999-01-2255 (1999).
CHUMLYAKOV, Y. I., I. V. KIREEVA, H. SEHITOGLU, E. I. LITVINOVA, E. G. ZAHAROVA, and N. V. LUZGINOVA. High strength single crystals of austenitic stainless steels with nitrogen content: mechanisms of deformation and fracture. Proc. 5th Intl. Conf. on High Nitrogen Steels (Espoo, Finland, May 1999), vols. 318-320, 395-400 (1999).
GALL, K., H. SEHITOGLU, and Y. I. CHUMLYAKOV. The effect of precipitates on martensitic transformation on single crystal NiTi shape memory alloys. Proc. 7th Intl. Symp. on Plasticity and Its Appl. (Cancun, Mexico, Jul. 1999) 207-210 (1999).
JIANG, Y. and P. KURATH. Investigation of localized cyclic ratcheting phenomenon. Proc. 7th Intl. Symp. Plasticity and Its Current Appl. (Cancun, Mexico, Jan. 1999) 902-912 (1999).
JONES, J. H. and P. KURATH. Multiaxial thermomechanical deformation utilizing a non-unified plasticity model. Proc. 7th Intl. Symp. Plasticity and Its Current Appl. (Cancun, Mexico, Jan. 1999) 51-54 (1999).
KARAMAN, I., K. GALL, H. SEHITOGLU, Y. I. CHUMLYAKOV, and H. J. MAIER. Orientation dependence of deformation in manganese steel single crystals. Proc. 7th Intl. Symp. on Plasticity and Its Appl. (Cancun, Mexico, Jul. 1999) 227-230 (1999).
KOK, S., A. J. BEAUDOIN, and D. A. TORTORELLI. Parameter estimation of a rate dependent polycrystal plasticity model through inverse analysis. 5th U.S. Natl. Congr. on Computat. Mech. (Boulder, Colo., Aug. 1999).
MAIER, H. J., T. J. SMITH, and H. SEHITOGLU. Modeling high temperature fatigue behavior of cast 319 type aluminum alloys. VDI Mater. Conf. (Dresden, Germany, Oct. 1999) 409-422 (1999).
NOE, S. and T. J. MACKIN. Thermoelastic evaluation of crack tip stress intensity factors. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).
REJDA, E. F., D. F. SOCIE, and B. P. NUEL. Bulk property testing of thick thermal barrier coatings. 31st Natl. Symp. on Fatigue and Fract. Mech. (Cleveland, Ohio, Jun. 1999).
SOCIE, D. F. Quantifying durability and variability in service loading conditions. 5th ISSAT Intl. Conf. on Reliability and Quality in Des. (Las Vegas, Nev., Aug. 1999) 6-10 (1999).
SOCIE, D. F. and E. F. REJDA. Cyclic deformation and fatigue of plasma sprayed thermal coatings. Proc. 7th Intl. Fatigue Conf. (Beijing, China, Jun. 1999) 1905-1912 (1999).
SOCIE, D. F. and J. Z. WANG. Strength of a composite laminate under multiaxial loading. ASTM Symp. on Multiaxial Fatigue and Deformation: Testing and Prediction (Seattle, Wash., May 1999).
VERNON, P. E. and T. J. MACKIN. Biaxial fatigue testing of polymer laminate membranes. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).
VERNON, P. E. and T. J. MACKIN. Fatigue crack detection in biaxially loaded laminated polymer membranes using infrared imaging. SEM Ann. Conf. (Cincinnati, Ohio, Jun. 1999).

Materials Processing
BALAGANGADHAR, D. and D. A. TORTORELLI. Design and analysis of rolling processes with a steady-displacement-based finite element formulation. Proc. 7th Intl. Symp. on Plasticity and Its Current Appl. (Cancun, Mexico, Jan. 1999) 297-300 (1999).
BANGE, M. E., A. J. BEAUDOIN, M. STOUT, S. R. CHEN, and S. R. MACEWEN. Coordinated experiment and simulation for non-uniform deformation in hot working of aluminum alloys. Mater. Res. Soc. Fall Mtg. (Boston, Mass., Dec. 1999).
BANGE, M. E., A. J. BEAUDOIN, M. STOUT, S. R. CHEN, and S. R. MACEWEN. Nonuniform deformation of aluminum alloys aa 5182 and aa 6061. 4th Intl. Conf. on Constitutive Laws for Engr. Mater. (Troy, N. Y., Jul. 1999).
BEAUDOIN, A. J. and P. R. DAWSON. Finite element simulation with explicit use of polycrystal plasticity theory. 12th Intl. Conf. on Textures of Mater. (Ottawa, Ont., Canada, Aug. 1999).
GAO, H., A. SCHEELINE, and A. J. PEARLSTEIN. Demonstration of a novel rotating cylindrical electrode in growth of oxide films with spatially controlled microstructural variation on Al 6061. Proc. Symp. on New Directions in Analyt. Chem. II (Seattle, Wash., May 1999) 116-124 (1999).
HABER, R. B., D. A. TORTORELLI, N. A. SOBH, J. HUANG, and R. W. HYLAND, JR. Process modeling and optimization for crashworthiness of extruded aluminum components. 1999 NSF Des. and Mfg. Grantees Conf. (Long Beach, Calif., Jan. 1999).
HUANG, J., N. SOBH, L. YIN, R. B. HABER, D. A. TORTORELLI, and R. HYLAND. Simulation of precipitate evolution in continuous quench of aluminum alloy extrusions. ASME Mech. and Mater. Conf. (Blacksburg, Va., Jun. 1999).
THOMAS, B. G. University-steel industry interaction. Proc. 40th Congreso Latinoamericano de Siderurgia (ILAFA 40 Congress) (Buenos Aires, Argentina, Sept. 1999) 65-67 (in Spanish) (1999).
THOMAS, B. G. and S. P. VANKA. Study of transient flow structures in the continuous casting of steel. 1999 NSF Des. and Mfg. Grantees Conf. (Long Beach, Calif., Jan. 1999).
THOMAS, B. G., H. BAI, S. SIVARAMAKRISHNAN, and S. P. VANKA. Detailed simulation of flow in continuous casting of steel using K-e, LES, and PIV. Proc. Intl. Symp. on Cutting Edge of Comput. Simulation of Solidification and Processes (Osaka, Japan, Nov. 1999) 113-128 (1999).
VERWEYST, B. E., C. L. TUCKER, P. H. FOSS, and J. F. O'GAVA. Fiber orientation in 3-D injection molded features: prediction and experiment. Proc. of PPS-15 (s'Hertogenbosch, Netherlands, Jun. 1999).

Microelectromechanical Systems (mems)
HAQUE, A. and M. T. A. SAIF. Bending response of a 100 nm thick free standing A1 cantilever beam. Mater. Res. Soc. Fall Mtg. (Boston, Mass., Nov./Dec. 1999).
HAQUE, A. and M. T. A. SAIF. Investigation of micro-scale materials behavior with MEMS. 1999 Intl. Mech. Engr. Congr. Expo. (Nashville, Tenn., Nov. 1999).
LONG, D. S., M. A. SHANNON, and N. R. ALURU. A hybrid finite-element/boundary element method for two-dimensional modeling of coupled electro-mechanical devices. Proc. 5th U.S. Nat. Congr. on Computational Mech. (Boulder, Colo., Aug. 1999) 231-232 (1999).
MANGRIOTIS, M. D., S. S. MEHENDALE, T. Z. LIU. A. M. JACOBI, M. A. SHANNON, and D. J. BEEBE. Flexible microfluidic polyimide channels. Proc. 10th Intl. Conf. Solid-State Sensors and Actuators (Sendai, Japan, Jun. 1999) 772-775 (1999).
PHILPOTT, M. L., M. A. SHANNON, N. R. MILLER, C. W. BULLARD, T. SAIF, N. ALURU, H. SEHITOGLU, D. J. BEEBE, A. M. JACOBI, P. S. HRNJAK, A. ROCKETT, and J. ECONOMY. Miniature energy conversion devices II. 1999 Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999).
SAGER, C. and M. T. A. SAIF. Capillary forces at the interface of a MEMS actuator. 1999 Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999).
SAIF, M. T. A. and N. R. MILLER. Modeling and analysis of a tunable bistable mems for opto-mechanical computational logic elements. 1999 ASME Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999).
SHANNON, M. A., M. L. PHILPOTT, N. R. MILLER, C. W. BULLARD, D. J. BEEBE, A. M. JACOBI, P. S. HRNJAK, T. SAIF, N. ALURU, H. SEHITOGLU, A. ROCKETT, and J. ECONOMY. Integrated mesoscopic cooler circuits (IMCCs). Proc. 1999 ASME Intl. Mech. Engr. Congr. and Expo. (Nashville, Tenn., Nov. 1999), AES-vol. 39, 75-82 (1999).

Operations Research
SWISHER, J. R. and S. H. JACOBSON. Discrete-event simulation optimization using ranking, selection, and multiple comparison procedures: a survey. Contributed (State-of-the-Art Tutorial), Winter Simulation Conf. (Phoenix, Ariz., Dec. 1999).