Bioengineering
DAMIANO, E. R. A poroelastic continuum model of the cupula partition and the response dynamics of the vestibular semicircular canal. J. Biomech. Engr., 121, 449-461 (1999).
FARAWAY, J. J., X. ZHANG, and D. B. CHAFFIN. Rectifying posture reconstructed from joint angles to meet constraints. J. Biomechan., 32, 733-736 (1999).
ZHANG, X. and D. B. CHAFFIN. The effects of speed variation on joint kinematics during multisegment movements. Human Movement Sci., 18:6, 741-757 (1999).

Combustion And Propulsion
BUFTON, S. A., R. L. BURTON, and H. KRIER. Measured exit plane properties of a low-power simulated-hydrazine arcjet. J. Propul. Power, 15:5, 735-736 (1999).
FOELSCHE, R. O., R. L. BURTON, and H. KRIER. Boron particle ignition and combustion at 30-150 atmospheres. Combust. Flame, 117:1z, 5-31 (1999).
LOUWERS, J., G. M. H. J. L. GADIOT, M. Q. BREWSTER, S. F. SON, T. PARR, and D. HANSON-PARR. Steady-state hydrazinium nitroformate (HNF) combustion modeling. J. Propul. Power, 15:6, 772-777 (1999).

Computational Science And Engineering
SOBH, N., J. HUANG, L. YIN, R. B. HABER, and D. A. TORTORELLI. A discontinuous Galerkin model for precipitate nucleation and growth in aluminum alloy quench processes. Intl. J. Numer. Meth. Engr. (1999).

Control Systems
ALLEYNE, A. and R. LIU. On the limitations of force tracking control for hydraulic servosystems. J. Dyn. Syst., Meas. Contr., 121:2, 184-190 (1999).
DULLERUD, G. E. Computing the L-2 induced norm of a compression operator. Syst. Contr. Lett., 37, 87-91 (1999).
DULLERUD, G. E. and S. LALL. A new approach for analysis and synthesis of time-varying systems. IEEE Trans. Automat. Contr., 44, 1486-1497 (1999).
DULLERUD, G. E. and S. LALL. Asynchronous hybrid systems with jumps-analysis and synthesis methods. Syst. Contr. Lett., 37, 61-69 (1999).
HAVLICSEK, H. and A. ALLEYNE. Nonlinear control of an electrohydraulic injection molding machine via iterative adaptive learning. IEEE/ASME Trans. Mechatron., 4:3, 312-323 (1999).
LANGSON, W. and A. ALLEYNE. Multivariable bilinear vehicle control using steering and individual wheel torques. J. Dyn. Syst., Meas. Contr., 121:4, 631-637 (1999).
ZHAO, H., W. LI, C. TAFT, and J. BENTSMAN. Robust controller design for simultaneous control of throttle pressure and megawatt output in a power plant unit. Intl. J. Robust Nonlinear Contr., 9, 425-446 (1999).

Design Methodology And Tribology
KLETZLI, D. B., C. CUSANO, and T. F. CONRY. Thermally-induced failures in railroad tapered roller bearings. STLE Tribol. Trans., 42:4, 824-832 (1999).
POLYCARPOU, A. A. and I. ETSION. Analytical approximations in modeling contacting rough surfaces. J. Tribol., 121, 234-239 (1999).
POST, R. A., T. F. CONRY, and C. CUSANO. The effects of adapter crown wear on rated fatigue life of a railroad bearing. STLE Tribol. Trans., 42:4, 874-880 (1999).

Dynamic Systems
AZEEZ, M. A. F. and A. F. VAKAKIS. Numerical and experimental analysis of a continuously overhung rotor undergoing vibro-impacts. Intl. J. Non-Linear Mech., 34, 415-435 (1999).
GEORGIOU, I. T., I. SCHWARTZ, E. EMACI, and A. F. VAKAKIS. Interaction between slow and fast oscillations in an infinite degree-of-freedom linear structure coupled to a nonlinear subsystem. J. Appl. Mech., 66:2, 448-459 (1999).
MA, X. and A. F. VAKAKIS. System identification by means of Karhunen-Loeve decomposition of the transient dynamics of a multi-bay truss. AIAA J., 3:2, 939-946 (1999).
MANEVITCH, L. I., M. A. F. AZEEZ, and A. F. VAKAKIS. Exact solutions for a discrete system undergoing free vibro-impact oscillations. PMM-J. Appl. Math. Mech. (Prikladnaya Matematika I Mekhanika) 63:4, 549-553 (1999).
SALENGER, G., A. F. VAKAKIS, O. GENDELMAN, L. MANEVITCH, and I. ANDRIANOV. Transitions from strongly- to weakly-nonlinear motions of damped nonlinear oscillators. Nonlinear Dyn., 20:2, 99-114 (1999).
VAKAKIS, A. F. Nonlinear vibrations: nonlinear normal modes, contributed article in Encyclopedia of Vibration, (Braun, Ewins, and Rao, eds.; Academic Press, 1999).
VAKAKIS, A. F. and T. M. ATANACKOVIC. Buckling of an elastic ring forced by a periodic array of compressive loads. J. Appl. Mech., 28, 21-36 (1999).
VAKAKIS, A. F., A. N. KOUNADIS, and I. RAFTOYIANNIS. Use of nonlinear localization for isolating structures from earthquake-induced motions. Earthquake Engr. Struct. Dyn., 28, 21-36 (1999).

Energy Systems And Thermodynamics
BURTON, C., A. M. JACOBI, and S. S. MEHENDALE. Vapor-liquid equilibria for R-32 and R-410A mixed with a polyol ester: non-ideality and local composition modeling. Intl. J. Refrig., 22, 458-471 (1999).
LI, C. and M. A. SHANNON. A simplified cavity analysis for estimating energy coupling during laser ablation and drilling of solids-experiment. Appl. Surface Sci., 150, 211-226 (1999).

Engineering Mechanics
CHEN, J. Y., Y. WEI, Y. HUANG, J. W. HUTCHINSON, and K. C. HWANG. The asymptotic crack tip fields in strain gradient plasticity. Engr. Fracture Mech., 64, 625-648 (1999).
GAO H., Y. HUANG, P. GUMBSCH, and A. J. ROSAKIS. On radiation-free transonic motion of cracks and dislocations. J. Mech. Phys. Solids, 47, 1941-1961 (1999).
GAO, H., Y. HUANG, W. D. NIX, and J. W. HUTCHINSON. Mechanism-based strain gradient plasticity, I-theory. J. Mech. Phy. Solids, 47, 1239-1263 (1999).
GAO, H., Y. HUANG, and W. D. NIX. Modeling plasticity at the micrometer scale. Naturwissenschaftler, 86, 507-515 (1999).
HUANG Y., W. WANG, C. LIU, and A. J. ROSAKIS. Analysis of intersonic crack growth in unidirectional fiber-reinforced composites. J. Mech. Phys. Solids, 47, 1893-1916 (1999).
HUANG, Y., H. GAO, W. D. NIX, and J. W. HUTCHINSON. Mechanism-based strain gradient plasticity, II-analysis. J. Mech. Phys. Solids, 48, 99-128 (1999).
HUANG, Y., H. GAO, and K. C. HWANG. Strain-gradient plasticity at the micron scale. Progress in Mechanical of Behavior Materials (Ellyin and Provan, eds.; Fleming Printing Ltd., 1999) 1051-1056 (1999).
HUO, B., Q. S. ZHENG, and Y. HUANG. A note on the effect of surface energy and void size to cavitation instability. Euro. J. Mech. Solids, 18, 987-994 (1999).
VERNON, P. E. and T. J. MACKIN. Fatigue failure analysis of a leg press machine. Engr. Failure Anal., 6, 1-12 (1999).

Fluid Dynamics
BOURDON, C. J. and J. C. DUTTON. Planar visualizations of large-scale turbulent structures in axisymmetric supersonic separated flows. Phys. Fluids, 11:1, 201-213 (1999).
KHINE, Y. Y. and J. S. WALKER. Thermoelectric magnetohydrodynamic effects during Bridgman semiconductor crystal growth with a uniform axial magnetic field: large Hartmann number solution. Transfer Phenomena in Magnetohydrodynamic and Electroconducting Flows (Alemany, Marty, and Thibault, eds.; Kluwer Academic Publishers) 269-278 (1999).
KING, G. F., J. C. DUTTON, and R. P. LUCHT. Instantaneous, quantitative measurements of molecular mixing in the axisymmetric jet near field. Phys. Fluids, 11:2, 403-416 (1999).
MA, N. and J. S. WALKER. Segregation during Bridgman crystal growth in space with an axial magnetic field. Magnetohydrodynamics, 35, 155-159 (1999).
MARTIN WITKOWSKI, L., J. S. WALKER, and P. MARTY. Nonaxisymmetric flow in a finite length cylinder with a rotating magnetic field. Phys. Fluids, 11, 1821-1826 (1999).
MEYER, T. R., J. C. DUTTON, and R. P. LUCHT. Vortex interaction in a driven gaseous axisymmetric jet. Phys. Fluids, 11:11, 3401-3415 (1999).
MORTHLAND, T. E. and J. S. WALKER. Instabilities of dynamic thermocapillary liquid layers with magnetic fields. J. Fluid Mech., 382, 87-108 (1999).
MUKHOPADHYAY, A., P. VENUGOPAL, and S. P. VANKA. Numerical study of vortex shedding from a circular cylinder in linear shear flow. J. Fluids Engr., 121:2, 460 (1999).
PALKO, C. W. and J. C. DUTTON. A method for separating shock wave motion and turbulence in LDV measurements. Exper. Fluids, 26, 358-370 (1999).
ROBICHAUX, J. H., S. BALACHANDAR, and S. P. VANKA. Three-dimensional instability of the wake of square cylinder. Phys. Fluids, 11:3, 560 (1999).
SELLERS, C. C. and J. S. WALKER. Liquid metal flow in an electrically insulated rectangular duct with a nonuniform magnetic field. Intl. J. Engr. Sci., 37, 541-552 (1999).
SHAW, R. J., J. C. DUTTON, and A. L. ADDY. Conditional analysis of wall pressure fluctuations in plume-induced separated flowfields. AIAA J., 37:11, 1436-1443 (1999).
SMITH, K. M. and J. C. DUTTON. A procedure for turbulent structure convection velocity measurements using time-correlated images. Exper. Fluids, 27, 244-250 (1999).
SMITH, K. M. and J. C. DUTTON. Evolution and convection of large-scale structures in supersonic reattaching flows. Phys. Fluids, 11:8, 2127-2138 (1999).
STONE, K. and S. P. VANKA. Numerical study of developing flow and heat transfer in a wavy passage. J. Fluids Engr., 121, 713-719 (1999).
WALKER, J. S. Models of melt motion, heat transfer, and mass transport during crystal growth with a strong magnetic field. Special volume on The Role of Magnetic Fields in Crystal Growth in Progress in Crystal Growth and Characterization of Materials (Benz, ed.; Elsevier Science) 38, 195-213 (1999).

Heat Transfer
DEJONG, N. C. and A. M. JACOBI. Local flow and heat transfer behavior in convex-louver fin arrays. J. Heat Transfer, 121, 136-141 (1999).
FUSHINOBU, K., L. M. PHINNEY, Y. KUROSAKI, and C. L. TIEN. Optimization of laser parameters for ultrashort-pulse laser recovery of stiction-failed microstructures. Numer. Heat Transfer, Part A, 36:4, 345-358 (1999).
GRAHAM, D., J. CHATO, and T. NEWELL. Heat transfer and pressure drop during condensation of refrigerant 134a in an axially grooved tube. Intl. J. Heat Mass Transfer, 42, 1935-1944 (1999).
HURLBURT, E. and T. NEWELL. Characteristics of refrigerant void fraction, pressure drop and heat transfer in annular flow. Intl. J. HVAC&R, 5:3, 229-248 (1999).
KEARNEY, S. P., R. P. LUCHT, and A. M. JACOBI. Temperature measurements in convective heat transfer flows using dual-broadband, pure-rotational coherent anti-Stokes Raman spectroscopy. Exper. Thermal Fluid Sci., 19, 13-26 (1999).
RUSH, T. A., T. NEWELL, and A. M. JACOBI. An experimental study of flow and heat transfer in sinusoidal wavy passages. Intl. J. Heat Mass Transfer, 42, 1541-1553 (1999).
STOREY, B. D. and A. M. JACOBI. The effect of streamwise vortices on the frost growth rate in developing laminar channel flows. Intl. J. Heat Mass Transfer, 42, 3787-3802 (1999).
TANG, K. C. and M. Q. BREWSTER. Analysis of molecular gas radiation: real gas property effects. J. Thermophys. Heat Transfer, 13:4, 460-466 (1999).
TANG, K., P. A. KAWKA, and R. O. BUCKIUS. Geometric optics applied to rough surfaces coated with an absorbing thin film. J. Thermophys. Heat Transfer, 13:2, 169-176 (1999).
TANG, K., Y. YANG, and R. O. BUCKIUS. Theory and experiments on scattering from rough interfaces. Ann. Rev. Heat Transfer, 10, Chapt. 3, 101-140 (1999).

Human Factors
JASEK, C. and P. JONES. Cooperative support for distributed supervisory control. Chapt. in Coordination Theory and Collaboration Technology (Olson, Malone, and Smith, eds.; Lawrence Erlbaum Assoc., 1999).
JONES, P. M. Human error and its amelioration. Chapt. 19, Handbook of Systems Engineering and Management (Sage and Rouse, eds.; John Wiley & Sons, 1999).

Manufacturing Systems
FERREIRA, P. M. and Z. J. PEI. Rotary ultrasonic machining of ceramics. Chapt. 17, Machining of Ceramics and Composites (Jahanmir, Ramulu, and Koshy, eds.; Marcel Dekker, Inc., 1999).
JACOBUS, K., R. E. DEVOR, and S. G. KAPOOR. Part warpage model based on machining induced residual stress. Trans. NAMRI, XXVII, 75-80 (1999).
STORI, J. A., C. KING, and P. K. WRIGHT. Integration of process simulation in machining parameter optimization. J. Mfg. Sci. Engr., 121:1, 134-143 (1999).
WALDORF, D. J., R. E. DEVOR, and S. G. KAPOOR. An evaluation of ploughing models for orthogonal machining. J. Mfg. Sci. Engr., 121:4, 550-558 (1999).
WALDORF, D., S. G. KAPOOR, and R. E. DEVOR. Worn tool forces based on ploughing stresses. Trans. NAMRI, XXVII, 165-170 (1999).
ZHU, R., S. G. KAPOOR, R. E. DEVOR, and S. M. ATHAVALE. Mechanistic force models for chip control tools. J. Mfg. Sci. Engr., 121:3, 408-416 (1999).

Materials Behavior
DINDINGER, P., P. KURATH, and M. LANGNER. Summary of the experimental program: induction hardened notch shaft. Chapt. 2, Multiaxial Fatigue of an Induction Hardened Shaft (Cordes and Lease, eds.; Soc. of Automotive Engineers), SAE-AE-28, 3-21 (1999).
GALL, K. and H. SEHITOGLU. The role of texture in tension/compression asymmetry in polycrystalline NiTi. Intl. J. Plasticity, 15, 69-92 (1999).
GALL, K., H. SEHITOGLU, Y. CHUMLYAKOV, and I. KIREEVA. Pseudoelastic cyclic stress-strain response of overaged single crystal Ti-50.8%Ni. Scripta Mater., 40:1, 7-12 (1999).
GALL, K., H. SEHITOGLU, Y. CHUMLYAKOV, and I. KIREEVA. Tension-compression asymmetry of the stress-strain response of aged single crystal and polycrystalline NiTi. Acta Mater., 47:4, 1203-1217 (1999).
GALL, K., H. SEHITOGLU, Y. I. CHUMLYAKOV, I. V. KIREEVA, and H. J. MAIER. The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: part II aged microstructure and modeling. J. Engr. Mater. Technol., 121:1, 28-37 (1999).
GALL, K., H. SEHITOGLU, Y. I. CHUMLYAKOV, I. V. KIREEVA, and H. J. MAIER. The influence on critical transformation stress levels and martensite start temperatures in NiTi: part I discussion of experimental results. J. Engr. Mater. Technol., 121:1, 19-27 (1999).
JIANG, Y. and H. SEHITOGLU. A model for rolling contact failure. Wear, 224, 38-49 (1999).
KURATH, P., Y. JIANG, and A. FATEMI. Strain path influence on multiaxial deformation and fatigue damage. Chapt. 12, Multiaxial Fatigue of an Induction Hardened Shaft (Cordes and Lease, eds.; Soc. of Automotive Engineers) SAE-AE-28, 117-139 (1999).
LITVINOVA, E. I., I. V. KIREEVA, E. G. ZAHAROVA, N. V. LUZGINOVA, Y. I. CHUMLYAKOV, H. SEHITOGLU, and I. KARAMAN. Twinning in hadfield steel single crystals. Phys. Mesomech., 2:1-2, 107-112 (1999).
MACKIN, T. J. and M. C. ROBERTS. Thermoelastic evaluation of damage evolution in ceramic matrix composites: a non-contacting stress mapping methodology. J. Am. Ceram. Soc. (1999).
MCGREEVY, T. E. and D. F. SOCIE. Competing roles of microstructure and flaw size. Fatigue Fract. Engr. Mater. Struct., 22:6, 495-508 (1999).
MILLER, P. D., C. P. LIU, W. L. HENSROM, J. M. GIBSON, Y. HUANG, P. ZHANG, T. I. KAMINS, D. P. BASILE, and R. S. WILLIAMS. Direct measurement of strain in a Ge island on Si (001). Appl. Phys. Lett., 75, 46-48 (1999).
RAJDA, E. and D. F. SOCIE. Cyclic deformation of ceramic coatings. J. Surf. Coatings Tech. 113, 218-226 (1999).
SEHITOGLU, H. and A. M. GARCIA. Contact of nonflat crack surfaces during fatigue. Am. Soc. Testing Mater., STP 1343, 367-378 (1999).
SEHITOGLU, H. and Y. CHUMLYAKOV (Guest eds.). Shape memory alloys. J. Engr. Mater. Technol. (1999).
SMITH, T. J., H. J. MAIER, H. SEHITOGLU, E. FLEURY, and J. A. ALLISON. Modeling high temperature stress-strain behavior of cast aluminum alloy. Meta. Trans., 30A, 133-146 (1999).
SOCIE, D. F. and G. B. MARQUIS. Multiaxial Fatigue. (Soc. of Automotive Engineers , 1999).

Materials Processing
ALBRIGHT, J. G., O. ANNUNZIATA, D. G. MILLER, L. PADUANO, and A. J. PEARLSTEIN. Precision measurements of binary and multicomponent diffusion coefficients in protein solutions relevant to crystal growth: lysozyme chloride in water and aqueous NaCl at pH 4.5 and 25?C. J. Am. Chem. Soc., 121, 3256-3266 (1999).
BALAGANGADHAR, D., G. A. DORIA, and D. A. TORTORELLI. A displacement based reference frame formulation suitable for steady-state thermo-elasto-plastic material processes. Intl. J. Solids Struct., 36:16, 2397-2416 (1999).
BEAUDOIN, A. J. The role of simulation in understanding surface roughness in formed aluminum arts. Frontiers of Engineering: Reports on Leading Edge Engineering (Natl. Acad. of Engr.; Natl. Academy Press) 68-74 (1999).
DANTZIG, J. A. Modeling solidification processes using FIDAP. Cryst. Res. Technol., 34:4, 417-424 (1999).
KIM, Y.-T., N. PROVATAS, N. GOLDENFELD, and J. A. DANTZIG. Universal dynamics of phase-field models for dendritic growth. Phys. Rev. E, 59:3, 2546-2549 (1999).
MICHALERIS, P., J. A. DANTZIG, and D. A. TORTORELLI. Minimization of welding residual stress and distortion in large structures. Welding J., 78:11, 361s-366s (1999).
MIKI, Y. and B. G. THOMAS. Modeling of inclusion removal in a tundish. Met. Mater. Trans. B, 30B:4, 639-654 (1999).
OZTEKIN, A. and A. J. PEARLSTEIN. Isobaric equation of state for liquid . J. Cryst. Growth, 204, 282-288 (1999).
PROVATAS, N., N. GOLDENFELD, J. A. DANTZIG, J. LACOMBE, A. LUPULESCU, M. KOSS, M. GLICKSMAN, and R. ALMGREN. Crossover scaling in dendritic evolution at low undercooling. Phys. Rev. Lett., 82:22, 4496-4499 (1999).
PROVATAS, N., N. GOLDENFELD, and J. A. DANTZIG. Adaptive mesh refinement computation of solidification microstructures using dynamic data structures. J. Comput. Phys., 148, 265-290 (1999).
VERWEYST, B. E., C. L. TUCKER, P. H. FOSS, and J. F. O'GARA. Fiber orientation in 3-D injection molded features: prediction and experiment. Intl. Polym. Processing, 14, 409-420 (1999).
WETZEL, E. D. and C. L. TUCKER. Area tensors for modeling microstructure during laminar liquid-liquid mixing. Intl. J. Multiphase Flow, 25, 35-61 (1999).

Microelectromechanical Systems (mems)
SAIF, M. T. A., E. ALACA, and H. SEHITOGLU. Analytical modeling of diaphragm micropumps. J. MEMS, 8:3, 335-345 (1999).

Operations Research
FLEISCHER, M. A. and S. H. JACOBSON. Information theory and the finite-time behavior of the simulated annealing algorithm: experimental results. INFORMS J. Comput., 11:1, 35-43 (1999).
JACOBSON, S. H. and E. YUCESAN. On the complexity of verifying structural properties of discrete event simulation models. Operat. Res., 47:3, 476-481 (1999).
JACOBSON, S. H. and L. W. SCHRUBEN. A harmonic analysis approach to simulation sensitivity analysis. IIE Trans., 31:3, 231-243 (1999).
JACOBSON, S. H., E. C. SEWELL, R. DEUSON, and B. G. WENIGER. An integer programming model for vaccine procurement and delivery for childhood immunization: a pilot study. Health Care Mgt. Sci., 2, 1-9 (1999).
JUN, J. B., S. H. JACOBSON, and J. R. SWISHER. Applications of discrete event simulation in health care clinics: a survey. J. Operat. Res. Soc., 50:2, 109-123 (1999).

Production Management
ZHAO, H., W. LI, C. TAFT, and J. BENTSMAN. Robust controller design for simultaneous control of throttle pressure and megawatt output in a power plant unit. Intl. J. Robust Nonlinear Contr., 9, 425-446 (1999).