PAPERS PRESENTED AT CONFERENCES AND SYMPOSIA
Automotive Systems
ALLEYNE, A. Improved vehicle performance using combined suspension and braking forces.
Proc. 1995 Am. Contr. Conf.
(Seattle, Wash., Jun. 1995) 1672-1676 (1995).
DEYOUNG, C. A., P. L. KELLY-ZION, J. E. PETERS, and R. A. WHITE. In-cylinder fuel droplet size and wall impingement measurements.
Proc. 8th Ann. Conf. on Liquid Atomization and Spray Syst.
(Detroit, Mich., May 1995) 221-225 (1995).
KELLY-ZION, P. L., C. A. DEYOUNG, J. E. PETERS, and R. A. WHITE. Characterization of port fuel injector sprays.
Proc. 8th Ann. Conf. on Liquid Atomization and Spray Syst.
(Detroit, Mich., May 1995) 236-240 (1995).
KELLY-ZION, P. L., C. A. DEYOUNG, J. E. PETERS, and R. A. WHITE. In-cylinder fuel drop size and wall impingement measurements. 1995 SAE Fuels and Lubricants Mtg. (Toronto, Ont., Canada, Oct. 1995).
LEE, C. F. and F. V. BRACCO. Comparisons of computed and measured hollow-cone sprays in an engine. SAE Int. Congr. and Expo., SAE paper 950284 (Detroit, Mich., Mar. 1995).
Combustion and Propulsion
BAYLESS, D. J., A. R. SCHROEDER, M. G. OLSEN, D. C. JOHNSON, J. E. PETERS, H. KRIER, and R. O. BUCKIUS. The effects of co-firing natural gas and coal on sulfur retention in ash.
Proc. Joint Mtg. Central States, Western States, and Mexican Nat. Sect., Combust. Inst.
(San Antonio, Tex., Apr. 1995) 608-613 (1995).
BAYLESS, D. J., A. R. SCHROEDER, J. E. PETERS, and R. O. BUCKIUS. Particle morphology contributions to burning rate measurements of pulverized coal at diffusion-limited conditions.
Proc. Joint Mtg. Central States, Western States, and Mexican Nat. Sect., Combust. Inst.
(San Antonio, Tex., Apr. 1995) 626- 631 (1995).
BERTAGNOLLI, K. E. and R. P. LUCHT. Investigation of stagnation-flow diamond-forming flames using advanced laser diagnostics. Fall Mtg., Western States Section, Combust. Inst., paper 95F-189 (Stanford, Calif., Oct. 1995).
BERTAGNOLLI, K. E. and R. P. LUCHT. Temperature measurements in a stagnation-flow, diamond-forming flame using CARS spectroscopy of hydrogen. Central States/Western States/Mexican Nat. Sections Mtg. at the Combust. Inst., paper 95S-024 (San Antonio, Tex., Apr. 1995).
BREWSTER, M. Q. and T. B. SCHROEDER. Experimental study of steady and unsteady combustion of RDX. 32nd JANNAF Combust. Subcommittee Mtg. (Huntsville, Ala., Oct. 1995).
BREWSTER, M. Q., M. A. ZEBROWSKI, T. B. SCHROEDER, and S. F. SON. Unsteady combustion modeling of energetic solids. 31st AIAA/ASME/SAE/ASEE Joint Propul. Conf., AIAA paper 95-2859 (San Diego, Calif., July 1995).
BUFTON, S. A., R. L. BURTON, and H. KRIER. Measured plasma properties at the exit plane of a 1 kW arcjet. 31st AIAA/ASME/SAE/ASEE Joint Propul. Conf. and Exhibit, AIAA paper 95-3066 (San Diego, Calif., Jul. 1995).
HANCOCK, R. D., R. P. LUCHT, V. R. KATTA, and K. Y. HSU. Finite-rate chemistry effects during vortex-flame interactions in a driven-jet diffusion flame. Central States/Western States/Mexican Nat. Sections Mtg. at the Combust. Inst., paper 95S-034 (San Antonio, Tex., Apr. 1995).
HICKMAN, S. R. and M. Q. BREWSTER. Oscillatory combustion of fine-AP/HTPB composite propellants. 32nd JANNAF Combust. Subcommittee Mtg. (Huntsville, Ala., Oct. 1995).
KRIER, H., R. L. BURTON, S. R. PIRMAN, and M. J. SPALDING. Shock initiation of crystalline boron in oxygen and fluorine compounds. 30th AIAA Thermophys. Conf., AIAA paper 95-2120 (San Diego, Calif., June 1995).
LUCHT, R. P. Saturation effects in degenerate four-wave mixing. 1995 Gordon Conf. on the Chem. and Phys. of Laser Diagnostics in Combust. (Plymouth, N.H., Jul. 1995).
MEGLI, T. W., H. KRIER, and R. L. BURTON. A plasmadynamics model for nonequilibrium processes in N2/H2 arcjets. AIAA 26th Plasmadyn. and Lasers Conf., AIAA paper 95-1961 (San Diego, Calif., Jun. 1995).
REICHARDT, T. A. and R. P. LUCHT. Degenerate four-wave mixing spectroscopy using picosecond lasers: theoretical analysis. Fall Mtg., Western States Section, Combust. Inst., paper 95F-198 (Stanford, Calif., Oct. 1995).
REICHARDT, T. A. and R. P. LUCHT. Effect of Doppler broadening on quantitative concentration measurements using DFWM spectroscopy. Central States/Western States/Mexican Nat. Sections Mtg. at the Combust. Inst., paper 95S-066 (San Antonio, Tex., Apr. 1995).
TILIAKOS, N. T., R. L. BURTON, and H. KRIER. Application of internal Langmuir diagnostic to arcjets. 31st AIAA/ASME/SAE/ASEE Joint Propul. Conf. and Exhibit, AIAA paper 95-2386 (San Diego, Calif., Jul. 1995).
Control Systems
ALLEYNE, A. A systematic approach to the control of a class of feedback linearizable systems.
Proc. ASME Int. Mech. Engr. Congr. Expo.
(San Francisco, Calif., Nov. 1995) DSC-vol. 57-1, 373-378, 379-384 (1995).
ALTER, D. M. and T. C. TSAO. Optimal feedforward tracking control of linear motors for machine tool drives.
Proc. Am. Contr. Conf.
(Seattle, Wash., Jun. 1995) 210-214 (1995).
BENTSMAN, J., R. BLAUWKAMP, J. BRODERICK, G. PELLEGRINETTI, and J. TSE. Robust predictive control methods. Chapt. in
Lecture Notes for the Wkshp.: Robust Self-Tuning Contr. and Indus. Appl., 34th IEEE Conf. on Decision and Contr.
(New Orleans, La., Dec. 1995).
BENTSMAN, J., J. TSE, G. PELLEGRINETTI, and R. BLAUWKAMP. Application of stabilizing H2 predictive control to boilers.
IFAC Contr. of Power Plants and Power Syst. SIPOWER '95
(Canales, Arroyo, and Balderrama, eds.) (Cancun, Mexico, Dec. 1995) vol. 2, 189-194 (1995).
BRODERICK, J., G. PELLEGRINETTI, J. BENTSMAN, and R. BLAUWKAMP. Real time robust adaptive control of a steam generation plant.
Proc. 38th Power Instrumentation Symp. Instrumentation
(La Jolla, Calif., Jun. 1995) vol. 38, 97-106 (1995).
FURNESS, R. J. and T. C. TSAO. Modeling and control of a form tool drilling process.
Proc. Am. Contr. Conf.
(Seattle, Wash., Jun. 1995) 718-722 (1995).
ORLOV, Y. and J. BENTSMAN. Model reference adaptive control (MRAC) of heat processes with simultaneous plant identification.
Proc. 34th IEEE Conf. on Decision and Contr.
(New Orleans, La., Dec. 1995) vol. 2, 1165-1170 (1995).
Design Methodology
BRUNS, T. E. and D. A. TORTORELLI. A coupled approach to the automated analysis and optimization of flexible multibody mechanisms.
Proc. SES'95 Soc. of Engr. Sci., 32nd Ann. Mtg.
(Hu and Michaelides, eds.) (New Orleans, La., Oct. 1995) 621-622 (1995).
BRUNS, T. E. and D. A. TORTORELLI. A coupled approach to the automated analysis and optimization of flexible multibody mechanisms.
Proc. 12th Conf. of the Irish Mfg. Committee IMC 12 Competitive Mfg.,
(De Almeida, ed.; Gemini International Ltd.) (Dublin, Ireland, Sept. 1995) 29-36 (1995).
HANSEN, J. M. and D. A. TORTORELLI. An efficient method for synthesis of mechanisms using an optimization method. IUTAM Symp. on Optimization of Mech. Syst. (Stuttgart, Germany, Mar. 1995).
MICHALERIS, P., D. A. TORTORELLI, and C. VIDAL. Analysis and optimization of weakly coupled thermo-bush-plastic systems with applications to weldment designs. 1st World Congr. of Struct. and Multidisciplinary Optimization (Goslar, Germany, May 1995).
MICHALERIS, P., D. A. TORTORELLI, and C. VIDAL. Analysis and optimization of weakly coupled thermo-elasto-plastic systems with applications to weldment designs.
Simulation of Materials Processing: Theory, Methods and Applications
(Shen and Dawson, eds.; Balkema, Rotterdam) (Ithaca, N.Y., 1995) 599-604 (1995).
PESCH, V. J., C. L. HINKLE, and D. A. TORTORELLI. Synthesis and optimization of planar mechanism kinematics using symbolically computed design sensitivities. IUTAM Symp. on Optimization of Mech. Syst. (Stuttgart, Germany, Mar. 1995).
SCHEUING, J. E. and D. A. TORTORELLI. Inverse conduction problem solutions via second-order design sensitivities and Newton's method. 7th Ann. Inverse Prob. in Engr. Sem. (Columbus, Ohio, Jun. 1995).
SMITH, D. E., D. A. TORTORELLI, and C. L. TUCKER. Sensitivity analysis of optimization of polymer sheet extrusion dies. SPE ANTEC '95 (Boston, Mass., May 1995).
Dynamics and Vibrations
CETINKAYA, C., M. A. F. AZEEZ, J. BROWN, and A. F. VAKAKIS. Symbolic computing in transient axisymmetric stress wave propagation in layered structures. Int. Conf. on Adv. in Sci. Computing and Modelling (Charleston, Ill., Oct. 1995).
KING, M. E., J. AUBRECHT, and A. F. VAKAKIS. Experimental periodic localized motions in coupled beams with active nonlinearities. 15th Biennial ASME Conf. on Mech. Vibration and Noise (Boston, Mass., Sept. 1995).
KING, M. E. and A. F. VAKAKIS. Nonlinear normal modes in the presence of internal resonances: an energy based approach. 15th Biennial ASME Conf. on Mech. Vibration and Noise (Boston, Mass., Sept. 1995).
PILIPCHUK, V. N., A. F. VAKAKIS, and M. A. F. AZEEZ. A non-smooth temporal transformation (NSTT) for analyzing strongly nonlinear motions of forced oscillators. 32nd Ann. Tech. Mtg., Soc. of Engr. Sci. (New Orleans, La., Oct./Nov. 1995).
PILIPCHUK, V. N., A. F. VAKAKIS, and M. A. F. AZEEZ. Primary pulse transmission in a system of linear layers and strongly nonlinar coupling elements. Symp. on Dyn. of Vibro-Impact Syst., Russian Acad. of Sciences, Inst. of Machine Elements (Mashinovedeniya) (Moscow, Russia, Oct. 1995).
VAKAKIS, A. F. Spatially localized oscillations in nonlinear periodic structures. 3rd Int. Congr. on Indus. and Appl. Math. ICIAM 95 (Hamburg, Germany, Jul. 1995).
VAKAKIS, A. F. and C. CETINKAYA. Analytical study of dispersion of stress waves in weakly coupled layered media. 15th Biennial ASME Conf. on Mech. Vibration and Noise (Boston, Mass., Sept. 1995).
VAKAKIS, A. F. and M. E. KING. A nonlinear normal mode approach for studying waves in nonlinear periodic systems. 15th Biennial ASME Conf. on Mech. Vibration and Noise (Boston, Mass., Sept. 1995).
Fluid Mechanics
BOZZI, L. A. and A. J. PEARLSTEIN. Inertial and deformation effects on the motion of a drop falling or rising at intermediate Reynolds numbers in a vertical tube. Am. Phys. Soc. Div. of Fluid Dyn. Ann. Mtg. (Irvine, Calif., Nov. 1995).
JYOTSNA, R. and S. P. VANKA. A pressure-based multigrid procedure for the Navier-Stokes equations on unstructured grids. 7th Copper Mountain Conf. on Multigrid Meth. (Copper Mountain, Colo., Apr. 1995).
MA, N. and J. S. WALKER. Buoyant convection during the growth of compound semiconductors by the liquid-encapsulated Czochralski process with an axial magnetic field and with a non-axisymmetric temperature.
Proc. ASME Symp. on Transport Phenomena in Electron. Mater. Processing
(San Francisco, Calif., Nov. 1995) HTD-vol. 317-2, 469-474 (1995).
PEARLSTEIN, A. J. and M.-P. SHIUE. Analysis of continuous helical flow electrophoretic separation of chiral drugs complexed to stereoselective cyclodextrin. Am. Inst. of Chem. Engr. Ann. Mtg. (Miami Beach, Fla., Nov. 1995).
VANKA, S. P. Unsteady flow simulations on parallel computers.
ASME IMECE
(San Francisco, Calif., Nov. 1995).
Gas Dynamics
DUTTON, J. C., J. L. HERRIN, M. J. MOLEZZI, T. MATHUR, and K. M. SMITH. Recent progress on high-speed separated base flows. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0472 (Reno, Nev., Jan. 1995).
EVERETT, D. E., J. C. DUTTON, and M. J. MORRIS. Pressure-sensitive paint measurements of the pressure field about a sonic jet injected transversely into a Mach 1.6 freestream. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0524 (Reno, Nev., Jan. 1995).
GRUBER, M. R., A. S. NEJAD, and J. C. DUTTON. Circular and elliptical transverse injection into a supersonic crossflow the role of large-scale structures. AIAA 26th Fluid Dyn. Conf., AIAA paper 95-2150 (San Diego, Calif., Jun. 1995).
HENDERSON, T. L., J. C. DUTTON, and E. LOTH. Computational study of the inviscid, nonlinear physics of supersonic base flows. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0783 (Reno, Nev., Jan. 1995).
HERRIN, J. L. and J. C. DUTTON. The turbulence structure of a reattaching supersonic free shear layer. AIAA 26th Fluid Dyn. Conf., AIAA paper 95-2250 (San Diego, Calif., Jun. 1995).
MAHADEVAN, R., E. LOTH, and J. C. DUTTON. Free shear layer interaction with an expansion/compression wave pair. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0475 (Reno, Nev., Jan. 1995).
MATHUR, T. and J. C. DUTTON. Base bleed experiments with a cylindrical afterbody in supersonic flow. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0062 (Reno, Nev., Jan. 1995).
SANTIAGO, J. G. and J. C. DUTTON. Velocity measurements for a sonic underexpanded transverse jet injected into a supersonic flow. AIAA 33rd Aerosp. Sci. Mtg., AIAA paper 95-0525 (Reno, Nev., Jan. 1995).
SMITH, K. M. and J. C. DUTTON. The role of large-scale structures in supersonic reattaching shear flows. AIAA 26th Fluid Dyn. Conf., AIAA paper 95-2251 (San Diego, Calif., Jun. 1995).
Heating, Air Conditioning, Refrigeration, and Cryogenics
AUTERI, F. P., J. C. CHATO, I. KURIASHKIN, J. S. M. EUM, and R. B. CLARKSON. Highly sensitive temperature indicating MRI contrast agents using stable paramagnetic nitroxide molecules. Summer Bioengr. Conf. (Beaver Creek, Colo., Jun. 1995).
BULLARD, C. W. The Industry-University Cooperative Research Center: Reinventing the land grant university. ASME/JSME Thermal Engr. Conf. (Lahaina, Hawaii, Mar. 1995).
CHATO, J. C. The quest for the perfect biological temperature measurement. Congr. 95, Société Française des Thermiciens (Poitiers, France, May 1995).
CHATO, J. C., ET AL. Prediction of the refrigerant-side heat transfer and pressure drop for the design of evaporators and condensers.
Proc. 46th Ann. Int. Appliance Tech. Conf.
(Urbana, Ill., May 1995) 12 pp. (1995).
JACOBI, A. M. A fundamental study of refrigerant line transients. ASHRAE Sem., Refrig. Line Transients: Fundam., Descriptions, and a Case Study (San Diego, Calif., Jun. 1995).
STOECKER, W. F. Bakery refrigeration technology. Am. Soc. of Bakery Engr. (Chicago, Ill., Mar. 1995).
Heat Transfer
COHN, D. W., K. TANG, and R. O. BUCKIUS. Bi-directional reflection and directional emission from microcontoured surfaces. ISHMT-ASME Heat Mass Transfer Conf. (Surathkal, India, Dec. 1995).
GEORGIADIS, J. G. Magnetic resonance imaging of freezing in packed beds. Heat Transfer in Porous Media and Two-Phase Flow, Energy & Environ. Expo. (Bayazitoglu and Sathuvalli, eds.; ASME)
HTD-Vol. 302,
143-155 (Houston, Tex., Jan.-Feb. 1995).
GEORGIADIS, J. G. and M. RAMASWAMY. Thermophysical manifestations of frost inception.
Proc. Symp. Thermal Sci. & Engr. in Honor of Chancellor Chang-Lin Tien
(San Francisco, Calif., Nov. 1995) 439-444 (1995).
ISBELL, R. A. and M. Q. BREWSTER. Optical properties of RDX and HMX. Mater. Res. Soc. Fall Mtg. (Boston, Mass, Nov. 1995).
RAMASWAMY, M., J. G. GEORGIADIS, and A. TENBUSCH. Microscopic study of frost inception: effects of surface morphology, supercooling, and grazing flow. ASME Int. Mech. Engr. Cong. & Expo., ASME preprint 95-WA/HT-22 (San Francisco, Calif., Nov. 1995).
RUSSO, R. E., X. L. MAO, M. A. SHANNON, and M. CAETANO. Laser abalation inductively coupled plasma-atomic emission spectroscopy: influence of noble gases. 22nd Ann. Conf., Fed. of Anal. Chem. and Spectros. Soc. (Cincinnati, Ohio, Oct. 1995).
SHANNON, M. A. and R. E. RUSSO. Ionization potential and collisional cross section of ambient medium affects on picosecond laser ablation of solid targets. 11th Interdisciplinary Laser Sci. Conf., Am. Phys. Soc. (Portland, Ore., Sept. 1995).
SHANNON, M. A. and R. E. RUSSO. Variations in mass etch rates as a function of laser power density, plasma shielding, and material composition. Optical Soc. of Am. Ann. Mtg. (Portland, Ore., Sept. 1995).
Human Factors
DELISLE, P. A. The agile environment: perspective from the odd-man in. Nat. Agility Forum Ann. Mtg. (Atlanta, Ga., Mar. 1995).
DELISLE, P. A. A customer-centered view of engineering education. ASEE Region Conf. (Purdue Univ., Mar. 1995).
DELISLE, P. A. A look at effective problem-solving styles of the Agile Team and Organization. Agile Mfg. Inst. Conf. (Rensselaer Polytechnic Inst., Oct. 1995).
DELISLE, P. A. Best practices in engineering education: interpersonal effectiveness. Nat. Elect. and Mech. Department Heads Assn. and the Univ. of Illinois at Urbana-Champaign (Nashville, Tenn., Mar. 1995).
DELISLE, P. A. Engineers and human resource developers: new partners for a new century. Acad. of Human Resource Dev. Ann. Mtg. (St. Louis, Mo., Mar. 1995).
JONES, P. M. and C. A. JASEK. Evaluating levels of automation in cooperative supervisory control: the mediator-associate experiment.
Proc. 1995 IEEE Int. Conf. Syst., Man, Cybernet., 5,
4569-4574 (1995).
JONES, P. M., N. CONTRACTOR, B. O'KEEFE, S. LU, M. CASE, P. LAWRENCE, and F. GROBLER. Work flow and cooperative problem solving in civil infrastructure management.
Proc. 1995 IEEE Int. Conf. Syst., Man, Cybernet., 5,
4575-4580 (1995).
MORAY, N., B. JONES, P. M. SANDERSON, D. V. REISING, S. SHAHEEN, and J. RASMUSSEN. The ``Birds Foot'' integrated graphical interface for NPP operation.
Symbiosis of Human and Artifact, 6th Int. Conf. on Human-Computer Interaction (HCI International 95)
(Anzai, Ogawa, and Mori, eds.; Elsevier Science Publ.) (Tokyo, Japan, Jul. 1995).
REISING, D. V. and P. M. SANDERSON. Mapping the domain of electronic repair shops: a field study in fault diagnosis. Human Factors and Ergonom. Soc. 1995 Ann. Mtg. (San Diego, Calif., Oct. 1995).
SANDERSON, P. M. The advising workbench: participation-based development of a software environment to support student advising. Human Factors and Ergonom. Soc. 1995 Ann. Mtg. (San Diego, Calif., Oct. 1995).
SANDERSON, P. M. MacSHAPA: software support for exploratory sequential data analysis. Human Factors and Ergonom. Soc. 1995 Ann. Mtg. (San Diego, Calif., Oct. 1995).
SANDERSON, P. M., N. IOZZO, J. BUBEREL, and I. AU. The advising workbench: participation-based development of a software environment to support student advising. 1995 Human Factors and Ergonom. Soc. Ann. Mtg. (San Diego, Calif., Oct. 1995).
SANDERSON, P. M., D. V. REISING, and M. AUGUSTINIAK. Diagnosis of multiple faults in systems: effects of mental set (expectancy) and prior exposure (practice). Human Factors and Ergonom. Soc. 1995 Ann. Mtg. (San Diego, Calif., Oct. 1995).
WAERN, Y. and P. M. JONES. Collaborative realtime process management.
CSCW '94 Wkshp, SIGCHI Bulletin, 27
:3, 33-38 (1995).
Manufacturing Processes and Machines
DEMETER, E. C., Q. SAYEED, R. E. DEVOR, and S. G. KAPOOR. An Internet-based model for technology integration and access, part 2: applications to process modeling and fixture design. Symp. on Agile Mfg., ASME IMECE (San Francisco, Calif., Nov. 1995).
DEVOR, R. E. Advanced machine tool systems user and builder needs assessment. NCMS (Detroit, Mich., Sept. 1995).
DEVOR, R. E. Agile manufacturing and machine tool systems: the NSF/ARPA MTAMRI. ASEE U.S. Ann. Conf. (New Orleans, La., Jan. 1995).
DEVOR, R. E. The Machine Tool Agile Manufacturing Research Institute. Conf. on Joining Infrastruct. and Technol. Mgt. for Global Enterprise (Urbana, Ill., Oct. 1995).
DEVOR, R. E. Progress report on the MTAMRI drilling technology project. MTAMRI University & Industry Partners (Evanston, Ill., Mar. 1995).
DEVOR, R. E. Software testbeds for the development and implementation of enabling technologies. Agility Forum Conf. (Atlanta, Ga., Mar. 1995).
DEVOR, R. E. Update on the Machine Tool Agile Manufacturing Research Institute. Technologies Enabling Agile Manufacturing (TEAM) (New Orleans, La., Sept. 1995).
DEVOR, R. E. and S. G. KAPOOR. Agile manufacturing and machine-tool systems: the NSF/ARPA Machine Tool Agile Manufacturing Research Institute. 1995 ASEE College Indus. Educ. Conf. (New Orleans, La, Jan. 1995).
DEVOR, R. E., S. G. KAPOOR, S. MELKOTE, and S. IYER. Software testbeds for the development and implementation of enabling technologies for agile manufacturing. 4th Ann. Agility Forum Conf. (Atlanta, Ga., Mar. 1995).
DEVOR, R. E., S. G. KAPOOR, and G. VENKATASUBRAMANIAN. An Internet-based model for technology integration and access, part 1: software and hardware
testbed models. Symp. on Agile Mfg., ASME IMECE (San Francisco, Calif., Nov. 1995).
DEVOR. R. E. and J. SEELY-GANT. World Wide Web-enabled my collaboration through dynamically linked engineering testbeds. Defense Mfg. Conf. (Dallas, Tex., Nov. 1995).
FURNESS, R. J. and T. C. TSAO. Drilling torque regulation of a form tool.
Proc. 27th CIRP Int. Sem. on Mfg. Syst.
(Ann Arbor, Mich., May 1995) 365-374 (1995).
PEI, Z. J., N. KHANNA, and P. M. FERREIRA. A study on material removal mechanisms in rotary ultrasonic machining of ceramics.
Proc. 11th Int. Symp. for Electro Machining, ISEM-XI
(Lausanne, Switzerland, Apr. 1995) 839-848 (1995).
PEI, Z. J., N. KHANNA, P. M. FERREIRA, and M. HASELKORN. Rotary ultrasonic face milling of magnesia stabilized zirconia. Am. Ceram. Soc. 97th Ann. Mtg. (Cincinnati, Ohio, Apr./May 1995).
RADULESCU, R., S. N. MELKOTE, S. G. KAPOOR, and R. E. DEVOR. A finite element based mechanistic dynamic model for face milling.
Proc. 1st World Congr. on Intell. Mfg. Proc. & Syst.
(San Juan, Puerto Rico, Feb. 1995) 1130-1144 (1995).
REVELIOTIS, S. A. and P. M. FERREIRA. Deadlock avoidance policies for the automated manufacturing cell. 1995 Am. Contr. Conf. (Seattle, Wash., Jun., 1995).
REVELIOTIS, S. A., M. A. LAWLEY, and P. M. FERREIRA. Part 1: an analytical framework for structural control of flexible manufacturing systems. 11th Int. Conf. on Computer-Aided Production Engr. (London, England, Sept. 1995).
REVELIOTIS, S. A., M. A. LAWLEY, and P. M. FERREIRA. Part 2: Structural control policies for flexible manufacturing systems. 11th Int. Conf. on Computer-Aided Production Engr. (London, England, Sept. 1995).
Manufacturing Systems
BRANSTAD, E., R. R. DAVID, and M. L. PHILPOTT. Manufacturing cost modeling thorough fractional factorial design.
ImechE Conf. Trans., 11th Conf. on Computer Aided Product. Engr.
(London, England, Sept. 1995) 211-216 (1995).
Materials Behavior
BEQUIGNAT, R., P. KRAWCZAK, W. CANTWELL, P. SCARAMUZZINO, M. DESAEGER, I. VERPOEST, H. HAMADA, Y. HIRAI, M. KOTAKI, M. HOJO, J. K. KIM, J. K. KOCSIS, T. J. MACKIN, J. MAYER, T. MORII, and T. TANIMOTO. Influence of different glass fiber sizings on the mechanical properties of glass fabric composites: report of a round robin test.
Proc. 10th Int. Conf. on Compos. Mater.
(Poursartip and Street, eds.; Woodhead Publ.)
vol. 4
(1995).
FOSS, P. H., H. H. CHIANG, L. P. IUZINNA, C. L. TUCKER, and K. F. HEITZMANN. Experimental verification of C-MOLD fiber orientation and modulus predictions.
SPE Tech. Papers, 41,
674-678 (1995).
ITOH, T., M. SAKANE, M. OHNAMI, and D. F. SOCIE. Nonproportional low cycle fatigue parameter written with only strain history.
Fatigue Des. 95
(Espoo, Finland, 1995) VTT 155, vol. I, 279-290 (1995).
KOTTGEN, V. B., M. E. BARKEY, and D. F. SOCIE. Structural stress-strain analysis of non- proportional loading suitable for FEM postprocessing.
Fatigue Des. 95
(Espoo, Finland, 1995) VTT 155, vol. I, 231-244 (1995).
KURATH, P. and Y. JIANG. Analysis of residual stresses and cyclic deformation for induction hardened components.
Proc. Soc. of Automotive Engr.,
SAE paper 95707 (Detroit, Mich., Mar. 1995) 15 pp. (1995).
LANGLAIS, T. E., J. H. VOGEL, D. F. SOCIE, and T. S. CORDES. A multiaxial fatigue life prediction program.
Fatigue Des. 95
(Espoo, Finland, 1995) VTT 155, vol. I, 245-260 (1995).
MACKIN, T. J. An experimental and theoretical investigation of stick-slip, roughness dominated and steady-state sliding in fiber-reinforced composites.
Mater. Res. Soc. Symp. Proc.
(Lowden, Ferber, Hellmann, Chawla, and DiPietro, eds.)
vol. 365
(1995).
MACKIN, T. J. Evaluation of interfacial properties for monazite coated oxide fibers in an oxide matrix. (West Lafayette, Ind., Nov. 1995).
MACKIN, T. J. Fiber bridging. West Coast Regional Mtg., Am. Ceram. Soc. (Seattle, Wash., Oct. 1995).
MACKIN, T. J. Fractals and fracture. Ann. Mtg. Mater. Res. Soc. (Boston, Mass., Nov. 1995).
MACKIN, T. J. Stress redistribution and notch sensitivity in ceramic matrix composites. Appl. Mech. Mater. Series of the ASM Conf. (UCLA, Jun. 1995).
SHANNON, M. A. Acoustic measurements of far-field stress vs. stresspower during laser- ablation of solids. Theoret. and Appl. Mech. Sem. Series (Urbana, Ill., Oct. 1995).
SMITH, D. E., D. A. TORTORELLI, and C. L. TUCKER. Optimization and sensitivity analysis in polymer processing: sheet extrusion die design.
Proc. NUMIFORM 95, Simulat. of Mater. Process.: Theory, Meth. and Appl.
(Shen and Dawson eds.; A.A. Balkema, Rotterdam) 619-624 (1995).
TUCKER, C. L. Advances in fiber orientation prediction for injection-molded composites.
Proc. NUMIFORM 95, Simulat. of Mater. Process.: Theory, Meth. and Appl.
(Shen and Dawson eds.; A.A. Balkema, Rotterdam) 191-196 (1995).
VOGEL, J. H., T. E. LANGLAIS, D. F. SOCIE, and T. S. CORDES. Fatigue life contours from elastic FEM considering multiaxial plasticity. ASTM Appl. of Automat. Technol. to Fatigue and Fracture Testing and Anal. (1995).
WHITE, S. R., N. R. SOTTOS, and T. J. MACKIN. Fabrication and characterization of composite materials with corn based reinforcements. 1995 ASME Int. Congr. (San Francisco, Calif., Nov. 1995).
Materials Processing
BYRNE, P. E., P. MICHALERIS, D. A. TORTORELLI, and J. A. DANTZIG. Optimal design applications in casting and welding.
Modeling of Casting, Welding, and Advanced Solidification Processes VII
(Cross and Marsh, eds.; TMS-AIME) (London, England, 1995).
DANTZIG, J. A., S. A. EBRAHIMI, and D. A. TORTORELLI. Optimal casting design.
Simulation of Materials Processing: Theory, Methods and Applications
(Shen and Dawson, eds.; A. A. Balkema, Rotterdam) 1119-1124 (Ithaca, N.Y., 1995).
DUFFEY, T. P., P. S. MOHANTY, K. NAGARATHNAM, M. II, and J. MAZUMDER. Science base for processing with high brightness diode-pumped Nd:YAG lasers. ICALEO '95 (San Diego, Calif., Nov. 1995).
KELLY, J., K. NAGARATHNAM, and J. MAZUMDER. Processing and characterization of laser cladded Cu-Sn-Zn coatings on cast aluminum alloys. ICALEO '95 (San Diego, Calif., Nov. 1995).
LI, G. and B. G. THOMAS. Thermal and mechanical behavior of the first wall in fusion reactors. 16th IEEE/NPSS Symp. on Fusion Engr. (Champaign, Ill., Sept./Oct. 1995).
LI, G. and B. G. THOMAS. Transient thermal model of the continuous single-wheel thin-strip casting process.
Proc. Int. Symp. on Near-Net-Shape Casting in the Minimills
(Canadian Inst. of Mining, Met. and Petroleum) (Vancouver, B.C., Canada, Aug. 1995) 373-387 (1995).
MAZUMDER, J. and J. CHOI. Numerical and experimental analysis for solidification and residual stress in the GMAW process for AISI 304 stainless steel. 4th Int. Conf. on Trends in Welding Res. (ASM International) (Gatlinburg, Tenn., Jun. 1995).
MAZUMDER, J., D. M. DOUGLASS, and K. NAGA
RATHNAM. Laser welding of A1 6061-T6. 4th Int. Conf. on Trends in Welding Res. (ASM International) (Gatlinburg, Tenn., Jun. 1995).
MOHANTY, P. S., A. KAR, and J. MAZUMDER. A modeling study on the influence of pulse shaping on keyhole laser welding. ICALEO '95 (San Diego, Calif., Nov. 1995).
RACKERS, K. and B. G. THOMAS. Clogging in continuous casting tundish nozzles.
Proc. 78th Steelmaking Conf.
(Iron and Steel Soc.) (Nashville, Tenn., Apr. 1995) 723-734 (1995).
SENGUPTA, D. K., J. I. MALIN, W. C. FANG, P. J. MARES, A. CURTIS, T. HORTON, N. F. GARDNER, M. FENG, S. L. CHUANG, K. C. HSIEH, G. E. STILLMAN, H. C. LIU, I. BLOOM, L. LUNDQVIST, M. DOOG, K. K. CHOI, J. MAZUMDER, and A. KAR. Noise characteristics of quantum well infrared photodetectors. 3rd Int. Symp. on Long Wavelength Infrared Detectors and Arrays: Phys. and Appl. (Chicago, Ill., Oct. 1995).
TEKRIWAL, P. and J. MAZUMDER. Thermomechanical modeling of residual strains and stresses in a GTAW process. Proc. 30th Nat. Heat Transfer Conf. (Portland, Ore., Aug. 1995)
ASME HTD-vol. 306,
241- 248 (1995).
THOMAS, B. G. Comments on the industrial application of process models.
Proc. Int. Symp. Mater. Process. in the Comput. Age II
(Voller, et al., eds.; The Minerals, Metals, and Materials Soc.) (Las Vegas, Nev., Feb. 1995) 3-19 (1995).
THOMAS, B. G., A. MOITRA, and R. McDAVID. Simulation of longitudinal off-corner depressions in continuously-cast steel slabs.
Proc. Process Technol. Conf.
(Iron and Steel Soc.) (Nashville, Tenn., Apr. 1995) 143-156 (1995).
THOMAS, B. G., A. MOITRA, and H. ZHU. Coupled thermo-mechanical model of solidifying steel shell applied to depression defects in continuous-cast slabs. Modeling of Casting, Welding, and Advanced Solidification Processes VII (London, England, Sept. 1995).
THOMAS, B. G. and H. ZHU. Thermal distortion of solidifying shell in continuous casting of steel. Japan Inst. of Metals, 117th Fall Ann. Mtg. (Honolulu, Hawaii, Dec. 1995).
Multiphase Flow
BAO, J. and S. L. SOO. Stress components in the particle cloud in pipe flow of a suspension.
Proc. 8th Int. Symp on Freight Pipelines
(Klinzing, ed.) (Pittsburgh, Pa., Sept. 1995) 210-215 (1995).
BAO, J., R. E. VAN DE WALL, and S. L. SOO. Laser velocimetry of a suspension with distribution in particle sizes.
Fluid Measurement Instrum.,
ASME FED-vol. 211, 123-127 (1995).
SOO, S. L. Cyclone collector for submicron particles.
Proc. 4th Conf. on Environ. Sci. Technol.
(Lekkas, ed.) (Molyvos Lesvos, Greece, Sept. 1995) vol. B, 42-47 (1995).
SOO, S. L. Dust collection using cyclones.
Proc. 20th Powder and Bulk Solids Conf.
(Rosemont, Ill., May 1995) 221-224 (1995).
Operations Research
KUHL, M. E., J. R. WILSON, and M. A. JOHNSON. Estimation and simulation of nonhomogeneous Poisson processes having multiple periodicities. Winter Simulation Conf. (Alexopoulos and Kang, eds.; Assn. of Comput. Machinery) (Arlington, Va., Dec. 1995) 374-383 (1995).
SHECTMAN, J. P. and N. V. SAHINIDIS. A finite algorithm for global minimization of separable concave programs.
Proc. State of the Art in Global Optimization: Computat. Meth. and Appl.
(Floudas and Pardalos, eds.; Kluwer Academic Publ.) (Princeton, N.J., Apr. 1995).
Tribology
PHILPOTT, M. L., C. CUSANO, and M. W. COLTON. Behavior of some sealing arrangements for machine tool spindles. 50th Ann. Mtg., Soc. of Lubrication Engr. (Chicago, Ill., May 1995).